Posts Tagged ‘Plumbing’

Buying The Right Plumbing Pipe Sizes

Friday, July 30th, 2010

When you are detailing out the size of the pipes for your plumbing needs, it is not all about determining the dimension of its physical appearance. External pipe diameters should also be considered in sizing up the pipes. Plumbing pipe sizes are determined on a unit value. The thread per inch defines the thread size of every plumbing pipe. In measuring the relative plumbing pipe size, both the thread per inch and the diameter is determined.

Precise forms of yarn of pipes which are applied for ventures relating to plumbing are recognized by the American National Standards Institute or ANSI. In the preceding existence, purpose of dimension of metal tube was reliant on its genuine diameter. Thus, it was an institution to contain a standard extent; stipulations were completely supported on the pipes exterior distance. To some extent, it was comparable in terms of sizing plumber pipe, the depth is also measured as the fabric utilized for piping nowadays is not finished up of uncontaminated metal or stimulate iron, but somewhat extra on copper cylinders. And so these days, dimensions of tubes are known as titular tube range or flatten tube range.

We could distinguish two types of plumbing pipe sizes, the Iron Pipe Size (IPS) and the Copper Tube Size or CTS. The IPS is based on the pipes length relevant to its single wall thickness. On the other hand, Copper Tube Sizes were devised since copper pipes have various sizes in terms of wall thickness aside from measurements of its length and diameters. Plumbing pipe sizes may come in a number of distinct thicknesses or sometimes termed as “schedules”. These schedules are measured in terms of the pipes inside diameter, the ID, and its outside diameters, the OD, with regard to the thickness of the walls. In terms of weighing the plumbing pipes, there are the Standard Wall (Std.), the extra strong wall or the XS, and the double extra strength wall or the XXS, with the last two plumbing pipe sizes regarded as extra heavy and the double extra heavy ones.

Dimension of plumbing pipelines to be exploited are reliant on the class of plumbing exertion or fix to be completed. Pipes to be applied for holding enormous amounts of force must be the deepest possible in array to allow incessant and uninterrupted heaviness rates. The profound sizes also evades burst on the pipeline and attaining probable leakages and meant for these rationale, heavy fenced pipes are usually smaller in conditions of its diameter.

When pipes are used in drainage, ventilation and waste pipe system, usually plumbing sizes that are thinner and much more lighter compared to the pressure pipes are the requirement. These kinds of pipes allow naturally a free flow of such matters. The standard plumbing pipes sizes used in residential ranges from 1 to inch, 2 inches to 4 inches pipes. The 4 inches soil pipe is used and most suitable for disposing solid materials. The most common pipe that is used to avoid clogging problems is the 3 inches pipe, which increases the flowing rate of any horizontally inclined piping system.

Do you seek to learn about buying good plumbing pipe sizes or fixing leaky pipes? Visit my links for additional information.

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Plumber In Poway Helps You Save Money By Going Green

Thursday, July 29th, 2010

Many people believe that “going green” means that they will have to pay out more money than they currently do. In actuality, if done right, you will save even more than you do. That’s right! You actually can save money each month while doing good things for the environment.

The first way you can save money is regarding your water usage. Taking the time to finally fix those leaks can save you money, as some leaks can be near 20 gallons a day. If you are disciplined to wash only full loads of laundry then you can save at least 15 gallons per load; and at 3 loads a week for 52 weeks that is a savings of over 2300 gallons of water per year. You also can shorten your showers, fix leaks in your garden hose, and turn off the water while brushing your teeth. All of these suggestions do not require major investment (or any!) and they can save you a good amount of money over a year.

Next, you can save electricity. This also will help the environment and save you a good amount of money. You can use fans in addition to your air conditioning to reduce the amount of electricity you need to get your home to a comfortable temperature. You can adjust your thermostat during the day when you are away from your home; and then you can adjust upon your return. This can be done year-round in order to reduce electricity usage and cut your bill. Cleaning out your various appliance filters will reduce safety risks, cut back on how much electricity you need, and ultimately help you to keep more of your money. You also can make sure that doors and windows are closed when running the air conditioner or heater.

Some people do not embrace a new philosophy, such as helping the environment, unless they make a significant financial expense or contribution. Should you have this tendency then there are some intelligent purchases you can make. First, you can purchase proper amounts of insulation for your home. You then can buy Energy Star qualified appliances to have more efficient use of electricity. You also can install low-flow faucet aerators, and shower heads to improve water usage.

You can go green, help the environment, and save money at the same time. Whether you do not want to invest a penny in such a philosophy, or if you need to invest money in order to give yourself incentive to take it seriously, you now have some options. Hopefully you will find that your energy bills are reduced enough to justify your actions and help you continue to use energy carefully.

Do you need help with your Poway plumbing and energy saving actions? If so, click the link or call (800) 353-0929. You also can get helpful tips here: Poway plumbers tips This article, Plumber In Poway Helps You Save Money By Going Green is released under a creative commons attribution licence.

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Are Commercial Plumbing Products Safe For The Environment?

Sunday, July 25th, 2010

The ever increasing concerns about the impact that our lifestyles is having on the environment has resulted in more care being taken regarding the type of products that we use that can affect such areas as the soil, water, and air. More people are choosing products that will not release toxins and chemicals into the environment. One such area where the products have undergone many changes in order to make them more environmentally safe is plumbing.

There are many different types of commercial plumbing products that are used in residential and commercial plumbing systems. Fortunately, commercial plumbing products have been developed that are environmentally friendly so they will not damage the environment. As well, these products are much more efficient than traditional over-the-counter store plumbing products.

There are commercial plumbing products used by plumbers concerned about environmental safety for both residential and commercial applications that do not harm the environment, For instance, there are eco-friendly drain cleaners that are both powerful at clearing clogs as well as preventing clogs from forming. The products used are safe for the environment so there is no worry about contamination of the ground water with harmful chemicals products. Drain cleaners available uses natural bacteria to break down substances. The bacteria are a vegetative microbe that breaks down the clogs in small pieces so they can be flushed through the plumbing system. They not only eliminate organic matter safely with no risk of environmental damage, but they also help eliminate bad odours. Natural drain cleaners are much safer than chemical drain cleaners found in local hardware stores.

There are natural urinal blocks that contain healthy bacteria that get rid of the build up of calcium inside drain lines. The result is clean drains, elimination of bad odours, and the water is able to flow freely and unobstructed. Another plumbing product used is a powdered septic tank activator. This is a natural microbe additive that is added to a septic tank. The microbes break down organic waste and prevent sewer line blockages. It is a safe natural microbe additive that will not harm the environment or the plumbing system.

Another commercial plumbing product that is safe for the environment is a water softener. A water softener is used to treat hard water. It is a natural product that replaces minerals that cause hard water. The replacement process is called an ion exchange. It is a natural process that does not involve harmful chemicals so it is an environmentally safe product. As well, there are natural grease trap cleaners available that safely clean grease traps and are safe for plumbing systems and the environment.

Because the plumbing system is designed to bring water to a home, remove waste water, and send clean treated water back to the environment, it is important that the plumbing system is properly maintained and the safest product are used. Fortunately, the plumbing industry is becoming much more environmentally conscious and choosing safe products to help keep the environment and people safe and healthy.

Looking for a local plumber to fix your plumbing problems? Then contact the plumbing experts at Mr.Rooter, offering plumber Aurora and plumber Thornhill services as well as plumbing services all across Canada.

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

A Newbie’s Introduction To Pinhole Learks In Your Home

Sunday, July 25th, 2010

Copper pipes and PVC plastic pipes are generally used for piping systems in homes, apartments, hotels and other industrial areas where water circulation is necessary. In order to give a good finish to house and to make water flow comfortably to all area in homes, the pipes takes bend in several directions. The bends later tends to cause some leaks in the pipes when water or fluids pass through it.

During initial stages, the leak from pipes takes place from a small hole commonly called as the pinhole. Later these small pipes tend to grow in their number, creating more leakage and more damage to the property. Repairing the caused damage involves lot of money and it is advised to treat the problem earlier. Pinhole leak, in general is defines as the leakage of water or fluid from a conducting material.

A Pinhole leak is common in all kind of pipelines and it is predominantly visible in pipes carrying hot water. Hotels and other institutions use hot water pipes compulsorily and they are very important. The main reason for the pinhole leak in hot water pipes is passage of chemicals along with water in these pipelines.

Some chemicals turn out to be quite corrosive when they are heated. These chemicals when flowing through hot water pipelines, tends to corrode the pipelines making the pipe to leak at a faster rate. Not only hot water pipes leaks, even cold water pipes tend to leak because of chemical effect.

If you are unaware of a pinhole leak in your home, then you are going to spend more money in repairing the damage caused by a pinhole leak. The water from pinhole leak pass through the building ceiling and walls and tend to make it weaker. Sometimes, water may even spoil some of the furniture beneath the ceiling. So, take immediate action for pinhole leak in your home.

Got a pinhole leak or want to learn more information about copper repipe types? Check out our website links and learn more.

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

How A Septic Tank Site Evaluation Is Performed

Sunday, July 25th, 2010

When a property for either a home or commercial building is evaluated for a septic tank installation, the inspector is checking to see if the site is suitable for onsite waste water treatment. An evaluation is very important because it helps protect homeowners from incurring costs in the future if there is a problem due to the location of the septic tank, and it protects the public and environment by ensuring the waste water will be disposed of and returned to the water table in a clean and healthy manner. Below is a general guide on how a septic tank site evaluation is performed:

1. A professional certified to evaluate septic sites will come to the property to do the septic site evaluation. The professional assesses the near by water sources and environmental considerations to make sure there is no health or safety hazard if the septic tank is installed. For instance, the inspector does not want waste water flowing into a creek or into a well.

2. Once the site area has been assessed, the inspector will assess the various levels of soil up to five feet into the ground. The homeowner will have hired an excavator to come out and dig a pit prior to the evaluation. The inspector will assess whether the soil conditions will support a septic tank. The soil assessment will look at such qualities as “soil texture” and “soil structure.” The inspector will determine if the soil will allow for a large enough drain-field for the water that will be returned to the ground after being treated in the septic tank.

3. A soil percolation test, or PERC test, will be performed to determine the rate in which soil absorbs a specific volume of water. This is done to make sure the soil is appropriate for a soak-away, and to make sure that the soak-away is designed correctly. It will also indicate the size of the septic system to be used and how it will be designed. To perform a percolation test, a set of holes are dug 300mm square and 300mm below the proposed outlet from the septic tanks or sewage treatment plant. The sides of the holes are mixed before the holes are pre-soaked. A controlled amount of water is poured in the hole and the test reading is based on how long it takes the soil to absorb the water added to the hole. A percolation test is considered to have failed if the results are fewer than 12 or over 100 seconds/mm drop. As well, a percolation test should not be carried out during bad weather, and if it is performed during the summer, then the number of times performing the test should be increased depending on the recent weather.

4. Once approved, that is, the results show proper adsorption, the septic marking points will be added to a survey to show where the septic tank will be located, As well, the area chosen will be free of trees and tree roots, underground cables, and away from buildings, property lines, or water sources such as creeks.

Septic tanks are required for any business or home. A Septic Tank Site Evaluation is mandatory to ensure the safety of the public and the environment. By understanding what the inspection involves, a homeowner can better prepare and budget for the expense.

Septic tank system can be environmentally friendly, effective and economical. FAST biological septic systems replace septic tanks and sewer lines. FAST wastewater treatment neutralizes septic sewage, grease trap interceptors,consuming contaminants, releasing just air and clear, odorless water.

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace